unisonic technologies co., ltd sb5100 diode www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r601-248.e 5.0a schottky barrier rectifier ? description the utc sb5100 is a 5.0a schottky barrier rectifier, it uses utc?s advanced technology to provide customers with high surge capability, high current capability and high efficiency, etc. the utc sb5100 is suitable for use in free wheeling, high frequency inverters, low voltage an d polarity protection applications. ? features * high current capability * high surge capability * low power loss * high efficiency ? symbol do-201ad smb (jedec do-214aa) sma (jedec do-214ac) + - + - smc (jedec do-214ab) + - ? ordering information ordering number pin assignment lead free halogen free package 1 2 packing sb5100l-sma-r SB5100G-SMA-R sma k a tape reel sb5100l-smb-r sb5100g-smb-r smb k a tape reel sb5100l-smc-r sb5100g-smc-r smc k a tape reel sb5100l-z21d-b sb5100g-z21d-b do-201ad k a tape box note: pin assignment: a: anode k: cathode (1) r: tape reel, b: tape box (2) sma: sma, smb: smb, smc: smc, z21d: do-201ad (3) g: halogen free and lead free sb5100l-sma-r (1)packing type (2)package type (3)green package ? marking sma / smb / smc do-201ad date code cathode band for uni-directional only utc sb5100 l: lead free g: halogen free sb5100 date code l: lead free g: halogen free cathode band for uni-directional only
sb5100 diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-248.e ? absolute maximum ratings (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage v r 100 v working peak reverse voltage v rwm 100 v peak repetitive reverse voltage v rrm 100 v rms reverse voltage v r(rms) 70 v average rectified output current t l =80c i o 5.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 150 a operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit sma/smb/smc 75 junction to ambient do-201ad ja 40 c/w ? electrical characteristics (t a =25c unless otherwise specified.) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v (br)r i r =0.50ma 100 v i f =5a, t j =25c 0.80 v forward voltage drop v fm i f =5a, t j =125c 0.75 v v r =100v, t a =25c 500 a leakage current (note 1) i rm v r =100v, t a =125c 50 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink.
sb5100 diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-248.e ? typical characteristics 0 25 50 75 100 125 150 175 0 1 2 3 4 5 6 7 i n s t a n t a n e o u s f o r w a r d v o l t a g e ( v ) 0.1 1.0 0.4 25c instantaneous forward current (a) 0.2 10 100 0.6 0.8 1.0 t y p i c a l f o r w a r d c h a r a c t e r i s t i c s average rectified current (a) c a s e t e m p e r a t u r e ( c ) f o r w a r d d e r a t i n g c u r v e if pulse width=300us 25 50 75 100 125 150 1e-2 1e-3 1e-4 1e-5 1e-6 1e-1 1e-7 case temperature (c) instantaneous reverse current (a) typical reverse characteristics v r =100v utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
